Leather Butt Covers with Ammo Loops for Lever-Action Rifles

A few spare rounds, right where you need them

There’s something familiar about a lever-action rifle wearing leather. A sling over the shoulder, a wrap around the lever, and a row of cartridges along the stock—it’s a combination that looks right and has a practical purpose.

A leather butt cover puts spare ammunition within reach while adding a protective layer around the part of the stock it covers.

For a rifle that spends time in the field, rides along on working days, or comes out every hunting season, those are useful additions. The cover takes some of the everyday contact that would otherwise reach the stock, and the cartridge loops give spare rounds a place to ride.

But the details matter. The cover needs to fit the stock, the loops need to suit the cartridge, and the layout needs to work with the person carrying the rifle.

That’s where we start with our leather butt covers at Busted B Leather.

Start with the stock, not just the brand

“Henry,” “Marlin,” or “Winchester” tells us something about your rifle. It doesn’t tell us everything we need to confirm the fit.

Stock shapes and dimensions can differ between models and configurations. An aftermarket stock or recoil pad may also change how a cover fits.

A cover should follow the stock it was designed for, with the closure properly secured and the leather sitting where it belongs. A familiar model name alone isn’t enough to assume compatibility.

Our available applications include supported Henry, Marlin, and Winchester rifles, with specific fit information provided in each listing. Before ordering, check your exact model and stock configuration against those details.

If you don’t see your rifle listed, contact us first. Clear photos and the exact model information can help us determine whether an available design will work.

The cartridge loops have their own job

A butt cover can fit the rifle correctly and still need the right loop selection.

Cartridges vary in size and shape, so we size the loops for the caliber selected from the listing. The goal is a secure fit that holds the round while allowing it to be removed as intended.

Available selections include calibers such as .45-70 Government, .44 Magnum, .357 Magnum, .30-30 Winchester, and .22, depending on the product.

Choose your exact caliber rather than assuming a similar-looking cartridge will use the same loop. Loop count and arrangement also depend on the particular cover and caliber, so check the listing rather than expecting every build to carry the same number of rounds.

Handedness matters, too. The side carrying the ammunition should suit the way you shoulder and use the rifle. Confirm the left- or right-hand selection before placing your order.

A little attention here helps put the cartridges where they belong without making the rifle awkward to handle.

Choose the leather you want to live with

Our butt covers are available in full-grain Hermann Oak vegetable-tanned cowhide, with Genuine Water Buffalo options where offered.

Smooth Hermann Oak brings a traditional finish that pairs naturally with wood and steel. It also gives you the option of decorative stamping where available in the listing.

Genuine Water Buffalo offers a more pronounced grain, rugged texture, and extra durability. Its natural character gives each piece a distinctive appearance.

Decorative stamps are available only on smooth Hermann Oak leather. Genuine Water Buffalo cannot be stamped. If a stamped design is part of the look you want, choose an appropriate Hermann Oak option.

Colors, stitching, and other available selections are shown in each listing. All upgrades carry an additional charge.

The hide is only the beginning. Accurate cutting, careful assembly, secure stitching, and finished edges all contribute to the piece you’ll put on your rifle.

The work underneath matters, too

We build our leather products with no exposed hardware positioned to rub against the rifle stock.

That’s a detail you may not notice in a photograph, but it matters when leather gear is fitted around a firearm you care about.

Our COBRA industrial leather stitchers from Leather Machine Co. handle the stitching, with the preparation, assembly, and finishing completed here in the shop. The edges are worked by hand as the design requires, and the finished piece is checked before packing.

A cover still needs sensible installation and care. Keep the stock and the leather beneath it free of trapped grit, follow the fitting instructions, and check that the closure remains secure.

Leather provides a layer of protection over the area it covers. It doesn’t make the rifle immune to moisture, scratches, or the effects of poor storage.

Carrying a .45-70? Think about the whole setup

A .45-70 rifle with spare cartridges on the stock is a substantial piece of gear. Adding ammunition adds weight, so consider how the complete setup will feel during a longer day.

A butt cover with ammo loops is intended to carry cartridges and cover part of the stock. It shouldn’t be treated as a recoil pad or a promise of reduced felt recoil.

A suitable leather rifle sling can help with carrying the rifle between stops. You can choose a sling with cartridge loops if you want additional ammunition on the rifle, or keep the sling clean and carry your spare rounds on the butt cover.

There’s no need to fill every available space. Choose the arrangement that suits how you use the rifle and what you’re comfortable carrying.

Bring the rest of the leather together

If you’re putting together a complete look, a sling and lever wrap can complement the butt cover.

Our lever-action wrap kits are available in American Bison, Genuine Water Buffalo, or Buckskin. They are not made from Hermann Oak leather.

Different hides bring different textures, so a coordinated set doesn’t have to look identical from one piece to the next. A smooth Hermann Oak butt cover can work alongside a textured lever wrap, just as a Water Buffalo sling and butt cover can bring their own character to the rifle.

Tell us which pieces you’re considering, and we can help you choose from the available finishes and options.

Empty the loops when the day is done

Cartridge loops are useful while you’re using the rifle. They shouldn’t become permanent ammunition storage.

Before putting the rifle away for an extended period, remove the cartridges. Prolonged contact between brass cases and leather can encourage green corrosion, commonly called verdigris.

After time outdoors, check for dirt and moisture around the cover. Care for the rifle according to its manufacturer’s instructions and let damp leather dry naturally, away from direct heat.

Avoid soaking the cover or applying heavy treatments without guidance. If the fit changes, a seam becomes damaged, or the loops no longer hold cartridges properly, contact us before trying to reshape the leather yourself.

Our leather care guide covers the everyday habits that help keep working leather in good condition.

Made in Lone Oak for the rifle you carry

We cut, build, and finish our gear in Lone Oak, Hunt County, Texas, with more than 35 years of leathercraft experience behind the work.

For us, a good butt cover needs to do more than photograph well. It needs the right fit, a useful layout, and finishing you’ll appreciate each time you handle the rifle.

Shop our in-stock butt covers for finished pieces that ship within 3–5 business days, or browse our made-to-order butt covers to see the available builds and options. Check each listing for rifle compatibility, caliber, handedness, and current lead time.

If you’re unsure which one to choose, contact us with your exact rifle model, stock configuration, and caliber before ordering.

A favorite lever gun already has plenty of character. The right leather adds a useful part to its next day in the field.