Lever-Action Leather Wrap Kits: Dress Up Your Marlin 1895 Yourself

A little leather where your hand does the work

You don’t have to change much about a lever-action rifle to give it a more personal feel.

Sometimes it’s as simple as leather wrapped around the lever—the texture against your fingers, the stitching following the curve, and a finish that looks at home beside wood and steel.

It’s a small detail you notice every time you work the action.

Our Lever-Action Leather Cover Kits let you add that detail yourself. The leather comes prepared, the installation supplies are included, and the work happens at your own pace.

Whether you’re finishing a Marlin 1895 or another supported lever gun, it’s a chance to put a little of your own handwork into the rifle you enjoy carrying. And if you’d rather leave the wrapping to us, we offer that option, too.

The wrap goes on the lever

A lever wrap and a butt cover serve different purposes.

A leather butt cover fits around the rifle’s buttstock, with cartridge loops where offered. A lever-action wrap fits around the lever itself, adding leather where your fingers make contact as you cycle the action.

It doesn’t cover the stock or forend.

That distinction matters when you’re choosing a kit. You’re looking for leather that follows the shape of your lever, with the correct coverage and enough room for the installation shown in the listing.

The rifle model is part of that decision, but so is the lever configuration. A standard loop, factory big loop, and aftermarket lever shouldn’t automatically be treated as interchangeable.

Choose the texture you like

Our lever-action wrap kits are available in American Bison, Genuine Water Buffalo, or Buckskin.

These kits are not made from Hermann Oak leather. Each available hide brings its own texture, appearance, and feel to the finished wrap.

You might want a wrap that complements the rest of your leather gear, or prefer a contrasting texture that stands out against the rifle. Natural variations in the hide help give each finished piece its own character.

Check the listing for the available leather and color selections. If you’re coordinating a wrap with a sling or butt cover, we can help you choose from the options offered for each piece.

Open the kit and get familiar with the pieces

The preparation is already done before the kit reaches you.

Inside, you’ll find pre-cut leather with pre-punched stitching holes, two large-eye stitching needles, Ritza 25 “Tiger” thread, and 3M two-sided adhesive strips.

The prepared leather gives you a starting point without needing to cut a pattern or punch your own holes. The adhesive helps hold it in position while you stitch, and the two needles let you work the seam shown in the installation instructions.

Before starting, lay everything out and watch our Lever-Action Leather Cover Kit installation video. Seeing the sequence first is easier than trying to work out the next step with the leather partly stitched in place.

Take your time with the first few stitches

Start with the rifle unloaded and all ammunition removed from the work area. Follow the firearm manufacturer’s handling instructions and the kit’s installation guidance.

Position the leather as demonstrated, using the supplied adhesive where instructed. Bring the edges into place, line up the prepared holes, and begin stitching with the two needles and supplied thread.

Work steadily along the seam. Keep the leather aligned and follow the demonstrated stitch tension rather than pulling harder to correct a positioning problem.

There’s no prize for finishing quickly. Taking a little extra time at the beginning helps the rest of the wrap come together neatly.

Once installed, check that the wrap is secure and does not interfere with the lever’s movement or the rifle’s controls. If something doesn’t look or function as expected, stop and contact us before using the rifle.

Prefer to leave the wrapping to us?

Not everyone wants a stitching project, and that doesn’t have to keep you from enjoying a leather-wrapped lever.

Our Lever Wrap Service lets you leave that part of the work to our shop. You remove the lever from your rifle and mail the lever only to us. We wrap it, then mail the finished lever back to you for reinstallation.

Before sending it, check the service listing for compatibility, available leather options, shipping instructions, and current lead time. Follow your firearm manufacturer’s guidance for removal and reinstallation or have a qualified gunsmith handle that work if you’re unsure.

You choose the look. We take care of the wrapping.

Confirm the lever before ordering

Our available kits include applications for rifles such as the Marlin 1895 in .45-70, Marlin 1894, and supported Henry and Winchester models.

The exact fit information belongs in the individual listing. Don’t assume a kit will fit simply because your rifle is a lever action or has a large loop.

If the lever has been changed, include that information when asking about compatibility. The rifle’s original model name may not identify the lever currently installed.

Send us the exact make and model, the lever configuration, and clear photos if you’re unsure. We can help confirm whether an available kit or our Lever Wrap Service suits what you have.

A project you get to enjoy afterward

There’s something satisfying about finishing a useful piece of work with your own hands.

You start with prepared leather and a length of thread. A little time later, the wrap follows the lever, the seam is finished, and the rifle has a detail you installed yourself.

You don’t need to become a leatherworker to enjoy that process. The kit provides the prepared parts, and the installation video walks you through the work.

It also gives you a closer appreciation of the details: how the edges meet, how the stitching holds them together, and how a small piece of leather changes the feel of something familiar.

If that process sounds more frustrating than enjoyable, the Lever Wrap Service gives you another way to reach the same goal: a finished leather wrap ready to become part of your rifle.

Keep it ready for the next outing

After installation, check the wrap periodically for movement, damaged stitching, or trapped dirt.

If it gets damp, let it dry naturally away from direct heat. Avoid soaking it or adding oils and treatments without checking that they suit the leather you selected.

The wrap sits against metal, so moisture deserves attention. Care for the rifle according to its manufacturer’s instructions and contact us if you need guidance about removing or replacing a wrap.

Our leather care guide covers the everyday habits that help keep leather gear in good condition.

Made in Lone Oak, finished your way

We prepare our kits and complete our Lever Wrap Service in Lone Oak, Texas, with more than 35 years of leathercraft experience behind the work.

With a kit, the cutting and hole preparation happens here, and the final stitching is your part of the project. With the service, you send us your removed lever, and we return it wrapped.

Browse our lever-action leather cover kits to see the available fit, leather, and color options, or choose our Lever Wrap Service if you’d prefer us to handle the wrapping.

You can also explore our in-stock rifle and shotgun gear, which ships within 3–5 business days, or our made-to-order collection. Check each listing for availability, included supplies, and current lead time.

If you’re unsure which option to choose, contact us before ordering.

A favorite lever gun doesn’t need much to make it feel more like yours. Whether you stitch the leather yourself or leave the wrapping to us, it’s a detail you’ll appreciate every time your hand meets the lever.